You're likely to be incorrect about WiFi repeaters not working.
Install directional antennae on your respective kit and/or install Tomato or DD-WRT on your kit. Old wireless routers are sadly better than their newer models in many respects for this purpose.
Directional antennae will work for quite far distances assuming you have line of sight. The reason for recommending a custom firmware is you can then set the data transfer rate manually and disable error prone technologies, such as stripped headers or custom compression that doesn't work well with longer distance WiFi setups.
Manually lower the transfer rate from adaptive to 1-2Mbps. 2Mbps is still high enough to stream HD video with a reasonable buffer at the start.
- Visitors can check out the Forum FAQ by clicking this link. You have to register before you can post: click the REGISTER link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. View our Forum Privacy Policy.
- Want to receive the latest contracting news and advice straight to your inbox? Sign up to the ContractorUK newsletter here. Every sign up will also be entered into a draw to WIN £100 Amazon vouchers!
Collapse
You are not logged in or you do not have permission to access this page. This could be due to one of several reasons:
- You are not logged in. If you are already registered, fill in the form below to log in, or follow the "Sign Up" link to register a new account.
- You may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
- If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
Logging in...
Previously on "Can homeplug travel back down the power main?"
Collapse
-
Originally posted by d000hg View PostWe have a private overhead power cable to our house.
We're having a second supply/meter installed maybe 40-50m back down the same overhead cable for the log cabin we're building in our grounds.
It's a bit far for WiFi repeaters so I wondered if there's any chance homeplug might travel outside our domestic wiring?
Otherwise we'll either get mobile internet or see if we can wing a cat 6 cable down there. We'd likely want internet for security cameras so I'm a bit dubious about 4g... Not for the quality but the data/cost.
Sent from my ONEPLUS A6003 using Tapatalk
or make one with tin foil. Make that two, obviously.
Leave a comment:
-
Originally posted by Lockhouse View PostWe've got a proper contractor-sized house and WiFi couldn't reach from one end to the other (over 40m). Two fuse boxes meant no Homeplug.
I fitted two cat 6 cables from the main switch, one exterior along the wall into the TV room switch and one into the roof to the next wing culminating in a POE wireless point. I'd tried repeaters and they were tulip. Over distance use cable every time.
HTH
Hence the mesh thing. It's not perfect but far better than multiple WiFi repeaters off cat6. Ideal might be mesh units hardwired into cat 6 so you can have a backbone but then seamless WiFi in each room. But by the time you set the mesh up you'd probably not need the cabling.
In my situation we have a big open air barrier, so either you didn't read my post or you just wanted to boast that you bought 3crummy terraces and knocked then together
Sent from my ONEPLUS A6003 using Tapatalk
Leave a comment:
-
Originally posted by Lockhouse View PostWe've got a proper contractor-sized house and WiFi couldn't reach from one end to the other (over 40m). Two fuse boxes meant no Homeplug.
I fitted two cat 6 cables from the main switch, one exterior along the wall into the TV room switch and one into the roof to the next wing culminating in a POE wireless point. I'd tried repeaters and they were tulip. Over distance use cable every time.
HTH
Of course running cat 6 is best, but there are ways around it if you can't/don't want put cables in.
Leave a comment:
-
We've got a proper contractor-sized house and WiFi couldn't reach from one end to the other (over 40m). Two fuse boxes meant no Homeplug.
I fitted two cat 6 cables from the main switch, one exterior along the wall into the TV room switch and one into the roof to the next wing culminating in a POE wireless point. I'd tried repeaters and they were tulip. Over distance use cable every time.
HTH
Leave a comment:
-
Originally posted by DoctorStrangelove View PostWHS the grounds may be at different voltages which will induce a current in the shield.
Very Inneresting things can happen in this situation.
Leave a comment:
-
Originally posted by BR14 View Post5.....
Now that's what I call a cantenna:
Shane F Liptak on Twitter: "@amatradio @arrl From garbage can to #Soundwave 5.0: a year of transformation #hamradio #hamr #cantenna #440MHz http://t.co/HEuFtJa3DE"
Or one with a funnel:
NeoduxLast edited by DoctorStrangelove; 5 November 2019, 13:58.
Leave a comment:
-
Originally posted by darrylmg View Post2x Pringles cans. Sorted.
Cantenna - Wikipedia
Sent from my SM-T280 using Contractor UK Forum mobile app
Leave a comment:
-
Originally posted by d000hg View PostThanks, I hadn't heard about directional repeaters.
It's getting separate utility connections so no trench. A hardwired connection seems too much trouble so I'll look into those.
Sent from my ONEPLUS A6003 using Tapatalk
Cantenna - Wikipedia
Sent from my SM-T280 using Contractor UK Forum mobile app
Leave a comment:
-
Originally posted by amanwhoisquiet View PostYou can get repeaters with directional antennas for working like a point to point bridge, which is what you're doing here. This is by far the easiest way to go.. so much easier than digging a trench.
There's an issue about running copper cables (catx) from your house to the new shed in that you'll need to check the ground is the same level, as you might end up with a charge on the cabling at one side. Your electrician should be able to help with this, but ususally you'd use optical cables to get around this, but don't bother with either and just do the p2p wireless link. You'd then need another wireless radio/ap (or just a socket or two) on the other side for using your devices.
Very Inneresting things can happen in this situation.
Very Very inneresting things can happen in the case of a neutral fault.
How should you ground your shielded Ethernet cable? – Bruce Perens
Like this guy says, it's either optical fibre or wireless as the best way to do it.
Other good advice: don't look down waveguides.
HTH.
Leave a comment:
-
Thanks, I hadn't heard about directional repeaters.
It's getting separate utility connections so no trench. A hardwired connection seems too much trouble so I'll look into those.
Sent from my ONEPLUS A6003 using Tapatalk
Leave a comment:
-
There are plenty of cheap Access Points with directional antennas that will carry your WiFi signal for 10 miles, let alone 50m to the shed.
Like this for £50
And much more reliable than homeplugs at such distances even if your wiring setup is suitable for homeplugs
If you need wired connection in the shed, just buy pair of them and set them in bridge mode.
Leave a comment:
-
You can get repeaters with directional antennas for working like a point to point bridge, which is what you're doing here. This is by far the easiest way to go.. so much easier than digging a trench.
There's an issue about running copper cables (catx) from your house to the new shed in that you'll need to check the ground is the same level, as you might end up with a charge on the cabling at one side. Your electrician should be able to help with this, but ususally you'd use optical cables to get around this, but don't bother with either and just do the p2p wireless link. You'd then need another wireless radio/ap (or just a socket or two) on the other side for using your devices.
Leave a comment:
-
I'd just take a laptop down to where the cabin is going and see if you can connect to the WiFi. If you can, there's a very good chance you'll still be able to get a signal from inside the cabin.
Leave a comment:
- Home
- News & Features
- First Timers
- IR35 / S660 / BN66
- Employee Benefit Trusts
- Agency Workers Regulations
- MSC Legislation
- Limited Companies
- Dividends
- Umbrella Company
- VAT / Flat Rate VAT
- Job News & Guides
- Money News & Guides
- Guide to Contracts
- Successful Contracting
- Contracting Overseas
- Contractor Calculators
- MVL
- Contractor Expenses
Advertisers
Contractor Services
CUK News
- Streamline Your Retirement with iSIPP: A Solution for Contractor Pensions Sep 1 09:13
- Making the most of pension lump sums: overview for contractors Sep 1 08:36
- Umbrella company tribunal cases are opening up; are your wages subject to unlawful deductions, too? Aug 31 08:38
- Contractors, relabelling 'labour' as 'services' to appear 'fully contracted out' won't dupe IR35 inspectors Aug 31 08:30
- How often does HMRC check tax returns? Aug 30 08:27
- Work-life balance as an IT contractor: 5 top tips from a tech recruiter Aug 30 08:20
- Autumn Statement 2023 tipped to prioritise mental health, in a boost for UK workplaces Aug 29 08:33
- Final reminder for contractors to respond to the umbrella consultation (closing today) Aug 29 08:09
- Top 5 most in demand cyber security contract roles Aug 25 08:38
- Changes to the right to request flexible working are incoming, but how will contractors be affected? Aug 24 08:25
Leave a comment: