• Visitors can check out the Forum FAQ by clicking this link. You have to register before you can post: click the REGISTER link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. View our Forum Privacy Policy.
  • Want to receive the latest contracting news and advice straight to your inbox? Sign up to the ContractorUK newsletter here. Every sign up will also be entered into a draw to WIN £100 Amazon vouchers!

Reply to: KVM switch

Collapse

You are not logged in or you do not have permission to access this page. This could be due to one of several reasons:

  • You are not logged in. If you are already registered, fill in the form below to log in, or follow the "Sign Up" link to register a new account.
  • You may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
  • If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

Previously on "KVM switch"

Collapse

  • ladymuck
    replied
    Originally posted by LondonManc View Post

    The OP is after KVM to support single keyboard and mouse controlling a desktop and a laptop interchangeably. Does your solution support that?
    Yes.

    Leave a comment:


  • LondonManc
    replied
    Originally posted by ladymuck View Post
    My monitor has KVM built in and you can split the screen to see the inputs* then use a natty key combination to switch the keyboard and mouse. If you need full screen then a natty key combination will switch the whole lot. Simples!

    *up to four!
    The OP is after KVM to support single keyboard and mouse controlling a desktop and a laptop interchangeably. Does your solution support that?

    Leave a comment:


  • ladymuck
    replied
    My monitor has KVM built in and you can split the screen to see the inputs* then use a natty key combination to switch the keyboard and mouse. If you need full screen then a natty key combination will switch the whole lot. Simples!

    *up to four!

    Leave a comment:


  • LondonManc
    replied
    Originally posted by jamsandwich View Post
    Has anyone here got any experience of using KVM switches?

    At home I've got a desktop pc with two monitors. I'm currently working from home using a work's laptop machine. I like an ergonomic workstation setup so I've been disconnecting one of my monitors from my home pc and plugging it into the laptop machine to use as my main screen (e.g. for coding) and just using the laptop screen for stuff that I look at occasionally (e.g. email). I find it annoying to have to crawl around on the floor to plug the monitor back into my home pc when I want to use both my monitors with it.

    To avoid having to keep plugging & unplugging the monitor cable I thought about buying a KVM switch. At first I thought of just getting one that has one monitor output and just sharing one monitor (and the keyboard and mouse) between the two machines. Then I started looking at switches that have two monitor outputs. Then I noticed that many KVM switches are 30Hz whereas my monitors are both set to approx 60Hz in the Windows10 display settings.

    The KVMs that have only one monitor output at 30Hz seem quite cheap, but once I started looking at those that are 60Hz and with two monitor outputs the price went up a lot. Not sure it's worth it for me. 30Hz seems quite slow (I think one of my monitors is capable of 144Hz). Does it matter much for stuff like coding, viewing webpages, email, video calls etc?

    I'm not sure it's worth the considerable extra expense to go for two monitor output and 60Hz. I think I might be better off just buying a single monitor 30Hz KVM. Not sure what brand to choose though.

    One option might be to set up a remote desktop connection from my home pc and use it to control my work's laptop. However, I don't want to share any data between the two machines. I really want to keep my personal data and work data separate, and therefore as I understand it, a KVM switch would be more appropriate for that purpose. Is there any risk of the machines seeing each other's data?
    Sounds like the setup I've got.

    I've got a desktop with two monitors, along with a works laptop that shares one of the monitors. The shared monitor is an LG, so the only effort involved is changing the input to the LG via the menu button under the screen.

    If you're sharing one keyboard and mouse, that would still work with a cheap KVM - you could get an oldschool (i.e. cheaper) VGA KVM switch to support just the keyboard and mouse via USB. You'd then have a button about the size of a 50p coin on your desk and click that as well as toggle the monitor to switch between the two.

    This would do the trick, just don't use the VGA cables:
    https://www.scan.co.uk/products/aten...15-cables-blac

    Leave a comment:


  • hairymouse
    replied
    Sorry I haven't had time to properly study the thread to be sure that what I am talking about will help you so take it for what it's worth.
    I bought this:
    https://www.amazon.co.uk/gp/product/...?ie=UTF8&psc=1
    and use it to switch between my work and home computers. My monitor has two hdmi inputs and switches automatically between them so both computers are plugged into the monitor. Rarely I have to use the buttons on the front of the monitor to switch manually if I happen to have both computers on.
    I have USB speakers and microphone and keyboard, so all those switch automatically . Works fine.

    Leave a comment:


  • DevUK
    replied
    I have this one: https://www.amazon.co.uk/gp/product/B083VYLWJP

    Works well

    Leave a comment:


  • d000hg
    replied
    Originally posted by BR14 View Post
    just use two hdmi cables. one plugged into the PC and one the laptop.
    then plug the one you want into the monitor, as and when.
    Apart from the faff of having to reach behind your monitor every time which will vary depending on your setup, frequent cable swapping is going to impact wear and tear. I'm often struck that sockets on monitors and the like are not particularly robust.

    I haven't used a KVM since about 2005. They were terrible back then, are modern ones pretty bullet-proof or can they still be erratic?

    Leave a comment:


  • Lance
    replied
    Originally posted by cojak View Post

    Ah so much for my rubbish shrug of the shoulders thinking that different formats might make that kind of thing unusable.

    Ta.
    haaha. wait till you get a looksee of USB-C....
    It's display port, thunderbolt, and usb, all rolled into one..

    Leave a comment:


  • cojak
    replied
    Originally posted by BR14 View Post
    Ah so much for my rubbish shrug of the shoulders thinking that different formats might make that kind of thing unusable.

    Ta.

    Leave a comment:


  • Platypus
    replied
    Originally posted by cojak View Post
    And I'm caught between two stools.

    My laptop only has an HDMI port, and my monitor only has a Displayport, which mean I'm stuck with VGA.

    If anyone can come up with a suggestion to get around this, I'd be grateful.
    Buy a cheapo (Argos) 4K TV and use that as your monitor. Acres of screen for very little money.

    In fact I've changed from a multi-monitor setup to just one 40" telly with several machines connected to the HDMI ports, switch using the TV's remote.

    If I need two "screens" visible at the same time, Remotix solves that problem. Other VNC/RDP solutions are available.

    Leave a comment:


  • BR14
    replied
    Originally posted by cojak View Post
    And I'm caught between two stools.

    My laptop only has an HDMI port, and my monitor only has a Displayport, which mean I'm stuck with VGA.

    If anyone can come up with a suggestion to get around this, I'd be grateful.
    something like this? https://www.amazon.co.uk/DisplayPort.../dp/B07G79WR3L

    Leave a comment:


  • cojak
    replied
    And I'm caught between two stools.

    My laptop only has an HDMI port, and my monitor only has a Displayport, which mean I'm stuck with VGA.

    If anyone can come up with a suggestion to get around this, I'd be grateful.

    Leave a comment:


  • BR14
    replied
    just use two hdmi cables. one plugged into the PC and one the laptop.
    then plug the one you want into the monitor, as and when.

    Leave a comment:


  • jamsandwich
    replied
    Thanks for the reply.

    The laptop has and HDMI port and a "USB 3.2 Gen2 (USB Type-C) port with DisplayPort/Power Delivery/Thunderbolt (optional)" so I would need some sort of cable to go from USB C to the switch.

    The problem is, the laptop power supply uses the USB-C port so I would need to buy another power supply that uses the barrel-shaped power socked on the laptop, which means spending more money on top of the extra cost of a switch that has 2 monitor outputs. Why do they waste the USB-C port on a power supply when the machine has a "barrel shaped" DC-in port?!

    I'm really doubting whether it's worth me spending the extra money for the 2 monitor KVM switch and additional stuff required. I haven't decided yet but am leaning towards just buying a single monitor KVM switch and putting up with 30Hz, because it is a lot cheaper.

    I just checked my Windows display settings. The lowest refresh rate it offered me was 50Hz. Not sure how that would work with a 30Hz switch?

    Leave a comment:


  • hobnob
    replied
    First up, a KVM is completely safe: the two machines won't have any access to each other's data. The worst case scenario would be if the KVM itself got exploited so that it could send malicious keyboard inputs to one of the computers (a similar concept to the Hak5 Rubber Ducky).

    More generally, I spent a while looking into this. Having 1 machine with 2 monitors is easy; likewise, having 2 machines sharing 1 monitor. Having 2 machines with 2 monitors is a bit more tricky, and it does depend on the input/output connectors. Most laptops have a variety, e.g. DisplayPort + HDMI rather than 2 of the same type. (If it's a fairly new laptop, you might have a USB-C connector that can also do Thunderbolt for DisplayPort compatibility.)

    In brief, I found that the best option is to use a DisplayPort KVM connected to an MST hub. I.e. 1 DisplayPort cable going between each computer and the KVM, 1 going from the KVM to the MST hub, and 2 cables coming out of the MST hub (1 for each monitor).

    Leave a comment:

Working...
X