Reply to: test please delete

[NickFitz]

Morning denizens

It's cloudy out again, and the air feels a bit damp; I don't know if there's been any more rain overnight but there's definitely more on the way right now, circling towards us from the direction of Birmingham according to the radar, and expected to move on around lunchtime. It continues to get cooler, being 13°C with an expected high of 17°, while the barometers have bounced back to 991/999mB

It looks as if the appliance slider deliveries will take place tomorrow, so I might do the shopping this evening. It's new Viz day today, so I'll have to go to Big Sainsbury's for it

This also means I'll have to swap today's and tomorrow's meal plans, but that's fine as the one originally planned for today is a slow-cooked thing involving a bit of prep work, and it'll be easier to do that tomorrow

[NickFitz]

Read a couple more Rumpole stories. They're enjoyable enough; I may even try watching the TV version some time

Thursday tomorrow!

I realised earlier that there are three meetings back to back from two to five tomorrow afternoon. That'll help pass the time until the weekend

Goodnight all

[xoggoth]

Gawd. I lead a U3A art group and had a boring 2 hours this afternoon at the open day, sitting at a desk surrounded by loud nattering old farts.

[NickFitz]

Tea: pork cutlet, chips, and beans

And I found there were some new, or at least unwatched by me, episodes of the Gloucestershire police night shift thing, so I watched one of them

[NickFitz]

Leftover kebab for lunch

Word has come that the appliance slider things are on their way, though without any clear indication of when they'll arrive. On reflection, I've decided that rather than mucking around with tape, it'll be less hassle to wait for them to turn up. The machine's been in the way for a week now so another day or two doesn't matter, really

[NickFitz]

you paid for delivery and installation, and installed it yourself??

No, they installed it - but I had to tell them how

[sadkingbilly]

you paid for delivery and installation, and installed it yourself??

[NickFitz]

Rather hilarious that the approved Miele installer has never seen the items being installed. I hope you get opportunity to feed back to customer services.

Yes, I'm glad I'd prepared for it! I was thinking last night once I'd run all the hoses through, I could just install it myself and be done with it, if it wasn't for the bit in the warranty about making modifications. At least he had me there to tell him how to do his job

[ladymuck]

Rather hilarious that the approved Miele installer has never seen the items being installed. I hope you get opportunity to feed back to customer services.

[NickFitz]

I pointed out that the vinyl was a bit torn at one side, and though I'd tried to glue it back down, it would very likely still be troublesome. He said in that case they couldn't do it (what a surprise) but TBH I'd always thought that was a possibility or even a likelihood, and I was just happy to have the machine connected and functional!

So I said I'd deal with it; I've already got some things on the way for sliding appliances into tight spaces on, but TBH I think I can probably get away with just putting tape down over the few troublesome inches, then lubricating the feet with washing up liquid (as both the last lot and this lot suggested). So now I'm wondering whether to try with parcel tape, which I have right here, or go down and see if the gaffer tape is in the boot of the car, or pop round to the hardware shop and get some more. They did advise me not to run the machine until it's in situ, which makes sense as I could do without it wandering around the room

Ok, I have a plan!

• Gaffer tape over the dodgy vinyl - it'll be hidden once the machine's in place, so who cares what it looks like
• Use the air wedges I got off Amazon to raise each side of the machine in turn and lubricate the feet with washing up liquid
• Get the machine into the niche up to just before the back foot would reach the tape - I can check this with the endoscope camera
• Raise that side again - just has to be a couple of millimetres, and most of the machine will still be out of the niche at that point
• Slide it back another inch or two so it's over the tape and won't bunch it up
• Remove the wedge, and slide it the rest of the way!

Wonder if it'll work? If it seems to not be working, I can wait until the slider things are delivered, but I'm quite tired of this whole business now so sooner would be better

In fact, maybe run the tape all the way out across the kitchen floor, so I can get the foot on it right from the start? Then I can lift the front feet up and trim it back once it's in. That would also let me see if it's bunching up the tape rather than sliding over it, before it's unreachable. Anyway, I'm supposed to be in a meeting soon, but I might experiment at lunchtime

[WTFH]

Oh, and I've won £50 on the Premium Bonds!

Only £25 interest for me. That's £625 for the calendar year.

[sadkingbilly]

Morning all
hissing it down here.
still, it'll fill up the pond. <duck emoji>

Oh, and I've won £50 on the Premium Bonds!

lemme a tenner??

[NickFitz]

Oh, and I've won £50 on the Premium Bonds!

[NickFitz]

Morning denizens

What a to-do! I'd just got out of the shower, some time before eight, when the doorbell went and the Miele installation people announced their presence! The only advance warning had been an email yesterday saying they'd phone an hour before arriving, which they hadn't

Anyway, as expected, things didn't go as smoothly as they might

I explained the situation and the work that needed doing. The bloke stated that he'd never seen nor fitted one of these Miele hose extensions so he couldn't do it. I asked if I could do it and he agreed that if I did it, they'd proceed, albeit with a note that they'd used my "non-standard" connection, so I screwed the things together. He then ended up undoing my work and doing it up again, including some extra tightening with a wrench, because the hose was "twisting the wrong way" or something

As for fitting the new Miele drain hose, which I reckoned clearly falls under the category of "modifications" which can affect the warranty because it's attached to the machine rather than just screwed on: it seemed he'd never seen one of those connections either! Luckily I'd watched a YouTube video explaining how to do it, so I talked him through the process and that got fitted by him, though once again I could have done it myself

And so he was finally able to get down to business under the sink. He was also a little surprised by the non-standard valve configuration for the water inlet, though at least he didn't try to tell me I was wrong when I explained it to him. And I'd hastily taken off the blanking cap and screwed the drain attachment back on when they'd first arrived in the kitchen, hoping I wasn't cocking it up, but the first thing he did was take that off again as it was easier to fit the drain hose on it that way! Then he screwed it back on, confirming that I'd got it right in the first place

He did a quick test ("water pressure's a bit low" - well, it's got a long way to travel so maybe it just took a while to start filling) and confirmed to his satisfaction that neither the inlet nor hose were leaking. And then it was time to push it into its niche! Or not

I pointed out that the vinyl was a bit torn at one side, and though I'd tried to glue it back down, it would very likely still be troublesome. He said in that case they couldn't do it (what a surprise) but TBH I'd always thought that was a possibility or even a likelihood, and I was just happy to have the machine connected and functional!

So I said I'd deal with it; I've already got some things on the way for sliding appliances into tight spaces on, but TBH I think I can probably get away with just putting tape down over the few troublesome inches, then lubricating the feet with washing up liquid (as both the last lot and this lot suggested). So now I'm wondering whether to try with parcel tape, which I have right here, or go down and see if the gaffer tape is in the boot of the car, or pop round to the hardware shop and get some more. They did advise me not to run the machine until it's in situ, which makes sense as I could do without it wandering around the room

So they wrote up all their caveats on their iPad and I signed it, and away they went!

Meanwhile, back in the real world: it's a grey, rainy start to the day and expected to continue so until teatime when it'll be windy as well. Fairly mild for the time of year at 17°C with an expected high of 19°; the barometers have plummeted to 979/987mB

[ladymuck]

Morning all, local time 0952

Sunny, no cloud. Currently 16 degrees with a high of 29 expected. Barometer down to 1017 mBar.

Sunrise 07:44; Sunset 20:43 CEST

I'm a bit sore headed today. HWMBO and I went out for cocktails and dinner. A very delightful time was had. Glad my first meeting isn't until 12 (BST).

The breakfast in this hotel isn't as good as the other hotel.