• Visitors can check out the Forum FAQ by clicking this link. You have to register before you can post: click the REGISTER link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. View our Forum Privacy Policy.
  • Want to receive the latest contracting news and advice straight to your inbox? Sign up to the ContractorUK newsletter here. Every sign up will also be entered into a draw to WIN £100 Amazon vouchers!

fixed term contract help

Collapse
X
  •  
  • Filter
  • Time
  • Show
Clear All
new posts

    #11
    Originally posted by WindyAnna View Post
    If going to them for 12 months as an employee (with additional benefits that brings) means that you are increasing your future opportunities as a contractor then why avoid it?
    I'd sooner negotiate to try ditching the holidays and other employment pointers with a view to turning it into a "normal" 12 month contract on a specified day rate.

    Comment


      #12
      I suppose it's what suits best. Personally I was offered one in negotiating but I viewed it as a poor relation to contracting based purely on what you can earn. So told them where to get off and give me a contract with a good daily rate.

      Comment


        #13
        By definition a 'fixed term contract' it is to be described like that in the contract means that the ToR as a contractor through own limited or brolly or employment as a temporary employee directly employed by the client is 'fixed.'

        As far as ir35 is concerned, anything with 'fixed' in it is is a no-goer for ir35 compliance, as the term 'fixed term' implies that MOO is definitely in place which should never the the case for an ir35 compliant role because no MOO should be in place either during the contract duration through your limited, or on completion of the contract term.

        There is a strong liklihood you will be on payroll, so make sure you get your benefits paid and your rights fully understood.

        Comment


          #14
          [QUOTE=Denny;342031]
          As far as ir35 is concerned, anything with 'fixed' in it is is a no-goer for ir35 compliance, as the term 'fixed term' implies that MOO is definitely in place which should never the the case for an ir35 compliant role because no MOO should be in place either during the contract duration through your limited, or on completion of the contract term.
          [QUOTE]

          This is bollucks

          You are correct that No MOO means that the contract cannot be a contract of service (which is what you are trying to achieve). But achieving No MOO is a whole lot more than being able to give a month's or even a day's notice.

          But having MOO in a contract is completely neutral as to whether it is one of, or for, service. Most contracts for services have MOO (E.g. Contracting a Plumber to fit a bathroom - This is a contract for services because he can sub the job, but it definately has MOO, as (usually) he is contracted to see that the task is completed).

          tim

          Comment


            #15
            Hum, why don't I get a little box around my qoute?

            tim

            Comment


              #16
              Originally posted by tim123 View Post
              Hum, why don't I get a little box around my qoute?

              tim
              You missed the / off of the last [quote]
              "Being nice costs nothing and sometimes gets you extra bacon" - Pondlife.

              Comment


                #17
                [QUOTE=tim123;342079][QUOTE=Denny;342031]
                As far as ir35 is concerned, anything with 'fixed' in it is is a no-goer for ir35 compliance, as the term 'fixed term' implies that MOO is definitely in place which should never the the case for an ir35 compliant role because no MOO should be in place either during the contract duration through your limited, or on completion of the contract term.

                This is bollucks

                You are correct that No MOO means that the contract cannot be a contract of service (which is what you are trying to achieve). But achieving No MOO is a whole lot more than being able to give a month's or even a day's notice.

                But having MOO in a contract is completely neutral as to whether it is one of, or for, service. Most contracts for services have MOO (E.g. Contracting a Plumber to fit a bathroom - This is a contract for services because he can sub the job, but it definately has MOO, as (usually) he is contracted to see that the task is completed).

                tim
                It's 'bollocks' not 'bollucks' so please learn to spell.

                You have missed my point entirely. No MOO is about not having to devote time to the client on a time and materials basis and being given any old job to do to make up the hours, rather than the deliverable that takes up the time you will bill for. Your plumber example is rubbish as this is the deliverable and the reason for the job in the first place.

                If you look at B&C contracts, they normally have a clause in them that makes clear that no MOO is about the time spent with the client as only determined by deliverables, not just about the obligation to commit after the role has finished.

                Otherwise, we'd all be on fixed term contracts guaranteeing work for the entire duration of the 6 months or whatever length it is. That is far from the case, if the client decides to pull a deliverable and give it to someone else, and tells you to find something else to occupy your time until it's time to come back and finish the work, there's nothing you can do except find your own work or do something else for another client. Usually, this isn't an issue as work is normally available to fit the entire time you are on site or wherever for the duration of the contract. To be ir35 compliant you should be fulfilling a stream of deliverables to fit your expertise, not just filling in time being given any work to do to fill the time.

                Reciprocally, No MOO is about being able the contractor being able to turn down work DURING the contract, if it is unsuitable and not fitting to their expertise they agreed to do, not just after the contact has ended.

                Comment


                  #18
                  [QUOTE=Denny;342174][QUOTE=tim123;342079]
                  Originally posted by Denny View Post
                  As far as ir35 is concerned, anything with 'fixed' in it is is a no-goer for ir35 compliance, as the term 'fixed term' implies that MOO is definitely in place which should never the the case for an ir35 compliant role because no MOO should be in place either during the contract duration through your limited, or on completion of the contract term.


                  It's 'bollocks' not 'bollucks' so please learn to spell.

                  You have missed my point entirely. No MOO is about not having to devote time to the client on a time and materials basis and being given any old job to do to make up the hours, rather than the deliverable that takes up the time you will bill for. Your plumber example is rubbish as this is the deliverable and the reason for the job in the first place.

                  If you look at B&C contracts, they normally have a clause in them that makes clear that no MOO is about the time spent with the client as only determined by deliverables, not just about the obligation to commit after the role has finished.

                  Otherwise, we'd all be on fixed term contracts guaranteeing work for the entire duration of the 6 months or whatever length it is. That is far from the case, if the client decides to pull a deliverable and give it to someone else, and tells you to find something else to occupy your time until it's time to come back and finish the work, there's nothing you can do except find your own work or do something else for another client. Usually, this isn't an issue as work is normally available to fit the entire time you are on site or wherever for the duration of the contract. To be ir35 compliant you should be fulfilling a stream of deliverables to fit your expertise, not just filling in time being given any work to do to fill the time.

                  Reciprocally, No MOO is about being able the contractor being able to turn down work DURING the contract, if it is unsuitable and not fitting to their expertise they agreed to do, not just after the contact has ended.

                  ------

                  The Company or the Client is under no obligation to offer work to the Supplier and the Supplier is under no obligation to accept any work that may be offered. Neither party wishes to create or imply any mutuality of obligation between themselves either in the course of or between any performance of the Services or during any notice period. The Company is not obliged to pay the Supplier at any time when no work is available during this Agreement

                  Comment


                    #19
                    I think you're missing the mutuality part, or at least not making it clear. It is important to know that MOO only exists if there is obligation on both sides.
                    Down with racism. Long live miscegenation!

                    Comment


                      #20
                      Originally posted by Denny View Post
                      It's 'bollocks' not 'bollucks' so please learn to spell.
                      .
                      I deliberately spell it wrong so that nanny doesn't delete it.

                      I wasn't aware that it wasn't on nanny's list

                      tim

                      Comment

                      Working...
                      X