server clone
i used easeus todo backup to clone system disk.
when i an cloning i can even resize the destination disk, thus i can make full use of the new hard disk.
u can google it.
- Visitors can check out the Forum FAQ by clicking this link. You have to register before you can post: click the REGISTER link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. View our Forum Privacy Policy.
- Want to receive the latest contracting news and advice straight to your inbox? Sign up to the ContractorUK newsletter here. Every sign up will also be entered into a draw to WIN £100 Amazon vouchers!
Reply to: Best way to clone a server hdd?
Collapse
You are not logged in or you do not have permission to access this page. This could be due to one of several reasons:
- You are not logged in. If you are already registered, fill in the form below to log in, or follow the "Sign Up" link to register a new account.
- You may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
- If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
Logging in...
Previously on "Best way to clone a server hdd?"
Collapse
-
I agree, I had the same issue with Acronis. Next Time I will guy drives with two different capacties just so that I can be certain. EG- Instead of 2 x 320Gb, buy 1 x 500Gb and 1 x 320Gb. Then it is crystal clear which drive is which at a glance.Originally posted by Cliphead View PostThe latest version I used reported the drives with the correct model numbers, the problem was identifying two identical drives - that's when to be very careful.
Leave a comment:
-
The latest version I used reported the drives with the correct model numbers, the problem was identifying two identical drives - that's when to be very careful.Originally posted by dinker View PostIf I recall correctly CloneZilla uses some weird scheme for identifying disks so make sure you know which disks are installed.
Leave a comment:
-
If I recall correctly CloneZilla uses some weird scheme for identifying disks so make sure you know which disks are installed.
Leave a comment:
-
Leave a comment:
-
Leave a comment:
-
have a look at this. I think it does answer your questions.
Clone your Ubuntu installation onto a new hard disk | Linux.com
Leave a comment:
-
Excellent, I hope the WD flavour of Acronis worked for you. It was 100% for me a few weeks back.
Leave a comment:
-
Tried that (it's EASEUS) and when it saw that I was running 64 bit Windows it wanted me to cough up for the paid for version.Originally posted by AtW View Post
I can confirm that. I just did a search for "Western Digital Acronis", and found the relevant version for my disk. There's also a WD "Data Lifeguard" utility which does low level reporting and testing.Originally posted by Fred Bloggs View PostSome HDD manufacturers have a free version of Acronis that you can use if there is at least one of their HDD's installed in the machine. I have used the Acronis software from Western Digital and from Seagate, I can confirm that they worked faultlessly for me when migrating HDD's.
Leave a comment:
-
Good tip, thanks!Originally posted by Sysman View PostI usually leave out the "v" from the tar command options, especially when going at a whole disk.
- any errors reported are easy to see
- if working remotely, you aren't consuming a load of bandwidth for the display of each and every file. Displaying everything over a network connection can slow the whole process down
Leave a comment:
-
I usually leave out the "v" from the tar command options, especially when going at a whole disk.Originally posted by administrator View PostIf you have only the one partition then it is easy. Just back up all the content in a tar file.
Howto: Backup and restore your system! - Ubuntu Forums
Did this recently with a machine containing about 100GB and it worked well.
Why not partition the disk to mirror your working one and then just tar, (or cp as someone else suggested) the content over. Or RSync.
- any errors reported are easy to see
- if working remotely, you aren't consuming a load of bandwidth for the display of each and every file. Displaying everything over a network connection can slow the whole process down
Leave a comment:
-
If you have only the one partition then it is easy. Just back up all the content in a tar file.
Howto: Backup and restore your system! - Ubuntu Forums
Did this recently with a machine containing about 100GB and it worked well.
Why not partition the disk to mirror your working one and then just tar, (or cp as someone else suggested) the content over. Or RSync.
Leave a comment:
-
Some HDD manufacturers have a free version of Acronis that you can use if there is at least one of their HDD's installed in the machine. I have used the Acronis software from Western Digital and from Seagate, I can confirm that they worked faultlessly for me when migrating HDD's.
Leave a comment:
-
Acronis True Image has always been a firm favourite with me.
Sure it costs £30 odd quid but it works flawlessly and most would struggle to make a mistake with it.
But plenty of the freebie apps out there will do it just as well as long as you know what you are doing.
Leave a comment:
- Home
- News & Features
- First Timers
- IR35 / S660 / BN66
- Employee Benefit Trusts
- Agency Workers Regulations
- MSC Legislation
- Limited Companies
- Dividends
- Umbrella Company
- VAT / Flat Rate VAT
- Job News & Guides
- Money News & Guides
- Guide to Contracts
- Successful Contracting
- Contracting Overseas
- Contractor Calculators
- MVL
- Contractor Expenses
Advertisers

Leave a comment: