Fixing a hi-fi

Visitors can check out the Forum FAQ by clicking this link. You have to register before you can post: click the REGISTER link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. View our Forum Privacy Policy.
Want to receive the latest contracting news and advice straight to your inbox? Sign up to the ContractorUK newsletter here. Every sign up will also be entered into a draw to WIN £100 Amazon vouchers!

You are not logged in or you do not have permission to access this page. This could be due to one of several reasons:

You are not logged in. If you are already registered, fill in the form below to log in, or follow the "Sign Up" link to register a new account.
You may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

d000hg replied

26 November 2010, 11:33
Hadn't thought about 2nd hand, though I don't really like buying heavy things on eBay. But tools and so on I have or could borrow, the only cost is my time so a few minutes is ok, but much more and it's cheaper to just buy.

If I open the amp up, how long after turning it off should I wait? Is it useful to do it while still warm, or should one wait several minutes to avoid charged capacitors?
Leave a comment:
Paddy replied

26 November 2010, 11:28
Originally posted by Spacecadet View Post

Or buy a new amp

Cleaner £6
Flux £7
Solder £3
Iron £20

Yes; buy a new amp on eBay!
Leave a comment:
The_Equalizer replied

26 November 2010, 11:26
Originally posted by Spacecadet View Post

Or buy a new amp

Indeed. I love second hand hi-fi bargains. I bought myself a jolly nice Marantz number a couple of Christmas ago when I made a few bob from a sideline. I think it was something like £2500 new and I got it for £420. Magic amp. Then again, getting your current one fixed shouldn't be too hard and a bit cheaper.
Leave a comment:
d000hg replied

26 November 2010, 11:25
Shame to buy one for £100 if 10min might find something obvious.
Leave a comment:
Spacecadet replied

26 November 2010, 11:21
Originally posted by Paddy View Post

You will need.
PCB Cleaner.
Flux Pen
Soldering Iron
Soft solder

Take out the PCBs and clean them.
Use the flux pen to wet every solder joint and gently touch each joint with the hot iron so that the solder flows. If needed add some solder. It has probably failed on one of the components that gets hot.

Or buy a new amp
Leave a comment:
Paddy replied

26 November 2010, 11:15
Originally posted by Spacecadet View Post

It will be a broken solder joint somewhere. Thermal expansion will fix it whilst it's hot!

You will need.
PCB Cleaner.
Flux Pen
Soldering Iron
Soft solder

Take out the PCBs and clean them.
Use the flux pen to wet every solder joint and gently touch each joint with the hot iron so that the solder flows. If needed add some solder. It has probably failed on one of the components that gets hot.
Leave a comment:
Spacecadet replied

26 November 2010, 10:53
Originally posted by d000hg View Post

This weird "warming up" behaviour, what could it be? Why would a modern bit of kit do this, not like it's got valves?! Loose connection maybe inside, or a dry joint?

It will be a broken solder joint somewhere. Thermal expansion will fix it whilst it's hot!
Leave a comment:
gingerjedi replied

26 November 2010, 10:50
Originally posted by d000hg View Post

Have a oldish, reasonable Hifi, as separates... actually only using the core amp now. It has developed an odd fault that when you turn it on no sound comes out. If you start it playing something then a few minutes later you get a very quiet level appearing from one or both speakers, which gradually (or in little jumps sometimes) increases to where it should be based on the volume.

I initially thought it was just broken or the speaker cables were to blame, but swapping the speakers round and jiggling them shows it's totally consistent, no intermittent connections there. Similarly, the volume knob doesn't act erratic.

This weird "warming up" behaviour, what could it be? Why would a modern bit of kit do this, not like it's got valves?! Loose connection maybe inside, or a dry joint?
The system was acting as our TV external audio but has been relegated as my PC sound now due to the problems. I can't really justify to myself buying proper hi-fi separates for my PC but if I can get it working it's SO much nicer than crummy computer speakers, and then I can buy something new for the TV.

Look for bulging or leaking capacitors (the cylinder shaped things) they should be flat on top, easy to source and replace.
Leave a comment:
d000hg started a topic Fixing a hi-fi

26 November 2010, 10:46
Fixing a hi-fi

Have a oldish, reasonable Hifi, as separates... actually only using the core amp now. It has developed an odd fault that when you turn it on no sound comes out. If you start it playing something then a few minutes later you get a very quiet level appearing from one or both speakers, which gradually (or in little jumps sometimes) increases to where it should be based on the volume.

I initially thought it was just broken or the speaker cables were to blame, but swapping the speakers round and jiggling them shows it's totally consistent, no intermittent connections there. Similarly, the volume knob doesn't act erratic.

This weird "warming up" behaviour, what could it be? Why would a modern bit of kit do this, not like it's got valves?! Loose connection maybe inside, or a dry joint?
The system was acting as our TV external audio but has been relegated as my PC sound now due to the problems. I can't really justify to myself buying proper hi-fi separates for my PC but if I can get it working it's SO much nicer than crummy computer speakers, and then I can buy something new for the TV.
Tags: None