External drive power

Visitors can check out the Forum FAQ by clicking this link. You have to register before you can post: click the REGISTER link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. View our Forum Privacy Policy.
Want to receive the latest contracting news and advice straight to your inbox? Sign up to the ContractorUK newsletter here. Every sign up will also be entered into a draw to WIN £100 Amazon vouchers!

You are not logged in or you do not have permission to access this page. This could be due to one of several reasons:

You are not logged in. If you are already registered, fill in the form below to log in, or follow the "Sign Up" link to register a new account.
You may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

Ken Dodd replied

16 February 2009, 14:30
drives

I had a good 250gb hard drive from a laptop that was bolloxed. I bought a cradle (abt £10) from the local Computer shop and installed it in that. The reason I mention it is because it only uses USB power but it has TWO plugs on the lead and both need to connected to USB ports to work - it needs all the power apparently.

Plus I now have a 250gb external drive - which is handy.
Leave a comment:
Durbs replied

15 February 2009, 11:27
Apparently Firewire can supply up to 30v compared to USB's 5v - is there a Firewire socket on it too or just USB?

My external HD has both but i haven't got a Firewire port on my PC to see if it works.

Last edited by Durbs; 15 February 2009, 11:32.
Leave a comment:
VectraMan replied

15 February 2009, 10:53
Ta. Makes sense - it was quite a fast drive in its day. In the enclosure it pulls 9W from the mains.

It never seems to spin down either, even when it's disconnected from a PC.
Leave a comment:
Durbs replied

15 February 2009, 10:24
If its a full size ATA drive then, no, USB cannot provide enough juice for these. It'll only be able to power a smaller laptop stylee drive.
Leave a comment:
VectraMan started a topic External drive power

15 February 2009, 09:46
External drive power

I've bought a "Dabs value" drive enclosure and put in a 120GB ATA drive from my old PC. Took 5 minutes to fit and all worked first time.

The description says "Powered by external AC power adapter or bus power", but I can only get it to work with the adapter plugged in.

Should these things be able to work just with power coming off the USB cable? Or do I need a different cable, or is it that the drive I have just needs too much power for USB? Anybody know how all this works?
Tags: None