• Want to receive the latest contracting news and advice straight to your inbox? Sign up to the ContractorUK newsletter here. Every sign up will also be entered into a draw to WIN £100 Amazon vouchers!

Wireless network (part 2)

Get a bridge. There are plenty around. I got one for the wife recently from Buffalo which had a four port switch included.

The bridge will connect wirelessly to your router and you use a cat 5 cable from the laptop to the bridge. You can then move the bridge and laptop around the house whereever you wish to work.
 
I have 2 ethernet ports on me PC, one which connects to the BT home hub for t'intertron with a Cat5. If I want to connect up an Xbox to access the net can I just connect it up with the other port on the PC? What manner of whichcraft do I have to perform in the settings to bridge the connection?
 
I have 2 ethernet ports on me PC, one which connects to the BT home hub for t'intertron with a Cat5. If I want to connect up an Xbox to access the net can I just connect it up with the other port on the PC? What manner of whichcraft do I have to perform in the settings to bridge the connection?

PC jiggery pokery when it comes to bridging isn't my forte - but to connect your xbox you could just get two wireless bridges and essentially run them as an ethernet point to point connection - one end plugs into your xbox, one into your hub and away you go.
 
Yeah, getting a wireless adaptor for the xbox would do the trick, but the reliability of the wifi on the BT Home hub (at least, my one) is utter pants so would like to use cables. Sure, I could run a second cable from the hub to the xbox but since it would go past the PC, I was hoping I could use the PC as a kind of router itself and therefore save another cable being nailed into the skirting board.
 
Yeah, getting a wireless adaptor for the xbox would do the trick, but the reliability of the wifi on the BT Home hub (at least, my one) is utter pants so would like to use cables. Sure, I could run a second cable from the hub to the xbox but since it would go past the PC, I was hoping I could use the PC as a kind of router itself and therefore save another cable being nailed into the skirting board.

Replace the BT Home hub then.

I love Linksys kit - I have a wireless router & 8 a separate port switch in my study, another hub in my son's bedroom - wired to the hub in the study, and a wireless access point for the PS2 in the playroom - all Linksys.

Yes we have a few computers in the house :o
 
Personally (and at work) I've had nothing but bad experience with Linksys, through many models and over many years.

I always go for Netgear kit. But I'm sure now someone will pop up with bad experiences of Netgear :smile

My house is partially wired for ethernet (I had all of the bedrooms, study and living room done whilst it was being built) and I have a Pre-N Netgear wireless router for the kids laptops.

For reliable ad-hoc connections where I don't have ethernet I use Homeplugs.

Replace the BT Home hub then.

I love Linksys kit - I have a wireless router & 8 a separate port switch in my study, another hub in my son's bedroom - wired to the hub in the study, and a wireless access point for the PS2 in the playroom - all Linksys.

Yes we have a few computers in the house :o
 
A better solution for the Xbox.

Put a cat5 splitter on either end of the cable that connects your PC to the hub.

http://www.homestead.co.uk/productcategorydetail.aspx?CategoryID=51338

You may need a couple of these depending on how your cable is terminated.

http://www.revealcable.co.uk/acatalog/info_AA_2622.html

you only use 2 of the 4 pairs in a cat5 cable so you can utilise the ones that aren't used, that way your PC doesn't need to be switched on to play Xbox live and you only need to run a cable as far as your PC connection.

Total cost... a tenner.
 

Advertisers

Back
Top