Its not drivers that will stop it booting but the HAL.dll (Hardware abstraction Layer) The HAL.dll is compiled when the OS is installed, so assuming you have the same OS on the new laptop, find the HAL.dll and copy it to a floppy or hard drive, USB etc. Image your new laptop, then using a boot CD such as BartPE or Winpe boot from CD, and copy over the HAL.dll you copied earlier over the hal.dll of your newly imaged laptop. That should ensure it boots and you can then mess about with any necessary drivers (hint: do the network first to get internet access to download the drivers)
If your new OS is different to your Ghost image, you could install the old OS (eg XP) onto the new laptop as a dual boot and get the newly created hal.dll this way.